11
4x
11
15s
EN - User Manual P7R Signature / P6R Signature V.01 03.2021
If you tap the switch four times, the
Backup Mode
is
switched on or off (see also No. 8).
11.
The lamp can be reset to factory settings. To do this,
switch on the lamp. Hold down the switch for about
eight seconds. The switch flashes once, then twice.
Release the switch when it has blinked twice.
Then press the switch again for five seconds until it
flashes four times. Now release the switch. The lamp
has been reset to the factory settings and can be used
again as usual.
2x red blink: Backup Mode
OFF
2x green blink: Backup Mode
ON
Reset to factory settings
ON
2x blink
1x blink
4x green blink:
Reset
hold
=8s
hold
=5s
