Installation Methods
1. Using LTSLSPK Spike and
LTSLEXT Extension Pole
3. Using LTSLPT Post Top Base
2. Using LTSLWB Wall Bracket
4. Using LTSLPT Post Top Base
Plate and LTSLEXT Extension
Poles
Screw the spike & extension
pole together
Add more extension poles if
necessary
Press Button to adjust CCT
and assemble the solar light.
Push the spike in to the ground
1
2
3
4
Mark the position and drill the
fixing holes
Use screws to fix the solar
light tight onto the wall
Press the button and adjust the
colour temperature
Assemble the solar light on
the wall bracket
1
2
3
4
Rotate the small pillar and
assemble the base
Fix the post top base
tightly onto a flat surface
Press the button and adjust the
colour temperature
Assemble the solar light on
the post top base
1
2
3
4
Rotate the small pillar and
assemble the base
Fix the base tightly onto
a flat surface
1
2
Press the button and adjust the
colour temperature
Screw the extension poles
and solar light onto the base
3
4
