Follow this advice you give your battery a long life.
Charge the batteries with the included chargers.
Be sure
to use the correct charger for each battery.
The main battery is charged with the larger charger 1 and
takes about 5-6 hours to charge fully.
Do not discharge
the battery before recharging.
The backup battery is charged with the little charger 2
and takes about 3 hours to recharge.
Do not discharge
the battery before recharging.
The battery should be at room temperature when
charging.
The LED on the charger lights red when
charging and green when the battery is fully charged, it
then goes over to maintenance charging.
Don´t leave the
charger plugged in when not necessary, but disconnect it
as soon as you see that the battery is charged.
When you
unplug the charger from the socket also separate the
charger and the battery, otherwise the charger will slowly
discharge the battery.
Programming
The lamp can be programmed and adapted to better suit
your own needs. Click the switch 4 times rapidly to get to
the programming menu - the lamp will light up. Click the
switch one short click at a time with the amount of blinks
that correspond to the program you have selected, for
example after three clicks the lamp will blink three times
in a row. When you have reached the program you want
simply exit the programming menu by pressing the
switch until the lamp shuts off. Do a test to make sure it is
the program you wanted.
Summary of Contents for Kaa 2 000 wide
Page 1: ...Kaa 2 000 wide English...
