LEDX Mamba 4000 X-pand, Instructions Manual

Headgear 

The headgear is adjusted at the back with Velcro and is easy to adjust, while 
the top straps are easily adjusted with a buckle. It is also equipped with seve-
ral attachment points for the cable from the lamp housing and its connector 
as well as the cable from the back battery which is threaded through a hob 
before it meets the connector from the lamp housing. At the back of the he-
adgear there is a Velcro strap to attach the Backup battery. 

Put on the headgear as follows: 

Release the lower headband and elastic on the back of the 
headgear.

Let the upper elastic attach about half way on the Velcro.

Put on the headgear, pull it down as far 
as possible or until it sits comfortably. 
Adjust the length of the upper band 
until comfortable. 

Adjust the lower band so it fits tightly 
in the neck. 

Specification: 

Lamp housing with 4 LED Cree, lighting system X-pand 

Weight: 
Lamp housing    

88 g 

Lamp housing with bracket  

131 g 

Lamp and head stand complete  

200 g 

Battery (108 Wh)  

590 g 

Backup battery   

30 g