Congratulations on your choice of LEDX Lights headlamp
You have chosen a quality product developed and manufactured in Sweden for
tough conditions. By using components of highest quality and giving you access to
our excellent service, we create long-lasting products thus reducing the
environmental impact. Please contact LEDX Lights service department for
maintenance and repair if you are experiencing any problems with Your product.
Safety regulations
Warning!
The light from the lamp is very powerful, avoid looking directly into the lamp or aiming
into your own or somebody else
’s eyes. Close your eyes and move your head away from
the light beam if someone accidentally directs the light into your eyes. Don´t use
binoculars or any other powerful focusing optics to look at the light beam.
Don´t try to repair the lamp or the battery yourself, if for any reason it is not working.
Trying to open the battery yourself is associated with the risk of fire or explosion. Contact
LEDX Lights service for guidance in case you are experiencing any problems with your
product.
Heat dissipation:
The lamp can get very hot, appr. +70°C. If the lamp is used without adequate airflow,
outdoors or indoors, in a couple of minutes lamp effect will be gradually reduced to appr.
75%, or 1600 lumens. The lamp needs constant airflow through the cooling fins achieved
by movement to deliver full effect. The speed depends on the surrounding temperature,
but 6 km/h is considered to be a target value at +20°C.
The lamp has a built-in thermostat preventing the lamp from overheating. It automatically
reduces the effect if the temperature e70°C, the effect gradually increases when
the temperature goes down again.
Technology
Summary of Contents for Snock 2000
Page 1: ......
