Revision A 17/12/2018
2
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
A
Screw the Door Stops to
the Top & Base in the pair of
holes further apart.
Ensure the vertical part is set
to the outside.
(2x screw 5/8” x 6g pan
head)
B
Screw the Stop Pins to the
Top & Base in the pair of
holes close together.
Ensure the pin is set to the
inside.
A
Screw the Z shaped door
catch on the Left Hand door
with screws in the holes
furthest from the edge.
(2x screw 5/8” x 4g csk)
A
B
A