2. Set Configuration parameter 0x03 to 1: Send Basic
Report
3. Set Configuration parameter 0x03 to 2: Send Basic
Report only when Load condition is changed not
by Z-WAVE Command, such as short pressing.
2. Sending Meter Report.
2, Association Group Info Command
Association Group Name Report Command
Grouping
identifier
value
Group 1
Lifeline,ASSIC Code:4C 69 66 65 6C 69 6E 65
Association Group Info Report Command
Paramete
r
Grou
p
Value
Profile
Group
1
General:Lifeline,Profile MSB=0x00,Profile LSB=0x01
3,
Association Group Support Command List