23
3.6.3
Output Mode Setting
Enter the setting interface. Press and hold the function setting key
for more than 2
seconds, then come to setting interface, Press and hold the inquiring key
（
,
）
for
more than half a second(less than 2 seconds), select the function setting, choose output voltage
setting interface, at the moment, the letters “OPU” will flash.
Enter the output voltage selecting interface. Press and hold the function setting key
for
more than half a second(less than 2 seconds), then come to setting interface of output voltage
OPU, at this time, the letters “OPU” will light for a long time. The numerical value below the OPU
will flash. Press and hold the inquiring key
（
,
）
for more than half a second (less
than 2 seconds), select the numerical value in accordance with “OPU” function. The provided
voltages are 100, 110V, 115V, 120V, 127V or 208V, 210V, 220V, 230V, 240V, you can choose
anyone by yourself.
Confirm the output voltage selecting interface. After selecting numerical value, press and hold
the function setting
, for more than half a second (less than 2 seconds). Now, the OPU
setting function is completed and the numerical value will light without flash.
Exit from the setting interface. Press and hold function setting key
for more than half a
second (less than 2 seconds), exit from the setting interface and return to main interface.
25%
50 %
75%
100%
25%
50%
75%
100%
25%
50%
75%
100%
25%
50%
75%
100%
Summary of Contents for 10KVA
Page 1: ...USER MANUAL RACK UPS 1 10 KVA ...
Page 2: ...2 ...
Page 3: ...3 USER MANUAL Rack Series 1 10 KVA ...
Page 44: ......
