17
default is 10V), anyone has been chosen, under BAT mode, UPS will shutdown when its battery voltage
achieve the voltage you chose.
③
Confirm the battery voltage selecting interface. After selecting numerical value, press and hold the function
setting
, for more than half a second (less than 2 seconds). Now, the battery setting function is
completed and the numerical value will light without flash.
④
Exit from the setting interface. Press and hold function setting key
for more than half a second (less
than 2 seconds), exit from the setting interface and return to main interface.
4.6.5 Frequency converter mode setting
①
CUCF mode only can be set in STDBY mode. In STDBY mode, enter the setting interface. Press and hold
the function setting key
for more than 2 seconds, then come to setting interface, Press and hold the
inquiring key (
,
)
for more than half a second(less than 2 seconds), select the function setting,
choose battery voltage setting interface, at the moment, the letters “CF” will flash.
②
Enter the CF setting interface. Press and hold the function setting key
for more than half a second(less
than 2 seconds), then come to setting in
terface of CF, at this time, the letters “CF” will not flash any more.
The “ON” (or OFF) will flash. Press and hold the inquiring key (
,
)
for more than half a second (less
than 2 seconds) to determine whether the CF function is used or not. If used, the corresponding word is
“ON”, if not, the word is “OFF”. It can be determined by yourself.
③
Confirm the CF selecting interface. After selecting ON or OFF, press and hold the function setting key
for more than half a second (less than 2 seconds). Now, the C
F setting function is completed and the “ON”
or “OFF” will light without flash.
④
Exit from the setting interface. Press and hold function setting key
for more than 2 seconds, exit from
the setting interface and return to main interface.
⑤
After setting CF
at “ON”, UPS would be back in STDBY Mode. The default value of CF is OFF.
4.6.6 Output frequency setting in CUCF mode
①
Output frequency only can be set when CUCF mode is ON.
Summary of Contents for 3106
Page 2: ...1 ...