background image

 

10 

capacity as stated in this User Manual. 

 

 

Legacy Does Not Cover or Undertake Any Liability in Any Event for Any of the 
Following: 
 

1. 

Loss of or damage to data, records, or software or the restoration of data or records, 
or the reinstallation of software. 

2. 

Damage from causes other than AC Power Line Transients, spikes, or surges on 
properly installed, grounded and code-compliant 120 volt power lines in the United 
States and Canada; transients, surges or spikes on standard telephone land lines, 
PBX telephone equipment lines or 

Base 10T

 Ethernet lines, when properly installed 

and connected.

 (This exclusion applies, for example, to fluctuations in data 

transmission or reception, by CATV or Therefore transmission or fluctuations, or by 
transients in such transmission.

 

3. 

Damage from any circumstance described as excluded above with respect to the 
product. 

4. 

Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, 
abuse, misuse or alteration of either the product or the Connected Equipment. 

 
Exclusion of Consequential and Other Damages. 
 

The sole and exclusive remedies of the Initial Customer are those provided by the 
Limited Warranty.  Legacy excludes any liability for personal injury under the Limited 
Warranty. Legacy excludes any liability for direct, indirect, special, incidental or 
consequential damages, whether for damage to or loss of property, loss of profits, 
business interruption, loss of information or data. This exclusion applies even though 
damage or loss is caused by negligence or other fault. NOTE: Some States or Provinces 
do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitation may not apply to you. 

 

DO NOT USE FOR 

MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER 

HIGH 

RISK ACTIVITIES. 
 

Legacy  does  not  sell  the  Products  for  use  in  high-risk  activities.  The  Product  is  not 
designed or intended for use in hazardous environments requiring fail-safe performance, 
including the operation of nuclear facilities, aircraft navigation or communication systems, 
air traffic control, weapons systems, life support 

or medical applications 

or for use in any 

circumstance  in  which  the  failure  of  the  Product  could  lead  directly  to  death,  personal 
injury, or severe physical or property damage, or that would affect operation or safety of 
life  support  device  (collectively,  "High  Risk  Activities").  Legacy  expressly  disclaims  any 
express or implied warranty of fitness for High Risk Activities. 
Legacy does not authorize use of any of its products use in any High Risk Activities.   
 

ANY SUCH USE IS IMPROPER AND IS A MISUSE OF LEGACY PRODUCTS

 
The  Limited  Warranty  is  governed  by  the  laws  of  the  United  States  and  the  State  of 

Wisconsin

, without reference to conflict of law principles.  

The application of the United Nations Convention of Contracts for the International Sale 
of Goods is expressly excluded. 
Contact Information: Legacy’s address is N9246 Hwy 80 South, Necedah, WI 54646 and 
its  phone  number  is  (608)  565-5878  or  (800)  859-5711  (toll  free).    Legacy  is  the 
warrantor under this Limited Warranty. You may also contact Legacy on the Internet at 

www.lpc-ups.com

 

Summary of Contents for Legend SB500R













Reviews: