INSTALLING YOUR UPS SYSTEM
UNPACKING
Inspect the UPS upon receipt. The box should contain the following:
(1) UPS Unit; (1) SeeUPS2020 Software Disk; (1) Serial Interface Cable (DB-9);
(1) Telephone Cable; (1) User’s Manual; (1) Warranty Registration Card
HARDWARE INSTALLATION GUIDE
1. Connect the equipments to your UPS outlets. Items such as copiers, laser printers,
vacuums, space heaters, or other large electrical devices should not be connected to
the UPS. The power demand of your connected equipment cannot exceed the
maximum total power rating of your UPS.
2. Connect your UPS power cord into a two-pole,
three-wire grounding receptacle only. Please avoid
using extension cords and adapter plugs. (To
maintain optimal battery charge, leave the UPS
plugged in at all times.)
3. Press the UPS power button to turn it on. The “Power On” indicator will be illuminated
Green.
4. Install your optional software and accessories. To use the software, simply connect the
enclosed serial interface cable to the serial port on the UPS and an open serial port on
the computer.
BASIC OPERATION
FRONT PANEL AND REAR PANEL DESCRIPTION
2
22
2
