Legend SB825
Uninterruptible Power System
◆
◆
◆
◆
Power Button
Press the power button to turn the UPS ON or OFF
◆
◆
◆
◆
Power On Indicator
This LED is illuminated when the utility condition is normal and the UPS
outlets are providing “clean power”, free of surges and spikes.
◆
◆
◆
◆
Using Battery Indicator
This illuminates during utility failure, indicating that the battery is
supplying power to the battery-power supplied outlets.
◆
◆
◆
◆
Battery Backup and Surge Protection Outlets
Provides three battery powered and surge protected
outlets for
connected equipment to insure temporary uninterrupted operation
during a power failure and protection against surges and spikes.
◆
◆
◆
◆
Surge Protection Outlets
Provides three surge protected
only outlets for connected equipment.
◆
◆
◆
◆
Circuit Breaker Reset for Overload Protection
Resetable circuit breakers provide optimal overload protection.
When
an overload occurs, the circuit breaker will pop and the UPS will switch
to battery back-up mode. Unplug at least one item from the UPS and
press the circuit breaker in to reset it.
◆
◆
◆
◆
Serial Port to PC
This port allows connection and communication from the DB-9 serial or
USB port on the computer to the UPS unit. The UPS communicates
its status to the SeeUPS2020 software. This interface is also
compatible with the UPS service provided by Windows NT, Windows
2000 and Windows XP.
◆
◆
◆
◆
Network Protection Ports (RJ45/RJ11)
These ports protect standard network cables and telephone cables.
3
