14
2. Power Up:
In the rear of the subwoofer to the immediate left of the
power cable input is the power switch. This switch controls current flow to
the entire unit as follows:
I
= o
n
0
= o
ff
Off/Auto On switch:
This switch starts or stops signal flow to the unit. In
Standby
the preamp unit stays active but the amplifier shuts down.
Auto On:
Once bass signal is received,
Xtreme
XD
will turn on
automatically. If the unit has not received a bass signal after 30 minutes,
Xtreme XD
will mute.
Off:
Will manually set unit to mute (standby)
NOTE: Be sure the front panel switch is in the OFF position before flipping
the rear panel power switch. This will avoid unnecessary transients
through the subwoofer. In either
Auto On
or
Off
position the LED display
will remain lit. Only when the rear power switch is in the off position, will
the LED go off.