Lineage LI2200
Uninterruptible Power System
••••
Communication Protection Ports (RJ11/RJ45)
Ports protect standard modem, fax, telephone line or network
cable.
••••
Dual Serial Ports
Lineage LI2200 UPS provides two serial ports to allow connection
and communication between the UPS and two computers. This
allows the simultaneous shutdown of two computer systems.
The Primary computer (with SeeUPS2020 Plus installed) is the computer that you will use to
control the UPS and make any changes to the operation of the UPS. The Secondary
computer (with SeeUPS2020 installed) is unable to exhibit any control over the UPS.
When there is a power failure, the Primary computer will start to shutdown after a user
controlled delay. Once the Primary computer is shutdown, the UPS will signal the secondary
computer and initiate a shutdown. The secondary computer will then shutdown. Once the
secondary computer has completed its shutdown, the UPS will power off..
SeeUPS2020 will save and close any open files prior to shutting the system down.
5
