Lineage LI2200
Uninterruptible Power System
BATTERY REPLACEMENT PROCEDURE:
7
1. Remove the right side front
panel.
2. Remove the two retaining screws of
the cable protection cover then
remove the cover.
3. Disconnect the black and red cable.
4. Remove the four retaining screws.
5. Pull the battery pack out from the unit.
6. Slide a new battery pack into the unit.
Assemble the screws, cover, cable and
front panel in the reverse sequence of
above steps.
7. Recharge the unit for 4-8 hours to
ensure the UPS performs expected
runtime