3
this heater.
•
NEVER
plug this heater into an outlet that is
old
,
cracked
, or
has any
loose wires or connections
. Plugging this heater into a
faulty outlet could result in
electric
arcing
within the outlet
that could cause the
outlet
to
overheat or catch
fire
.
•
ALWAYS
check your heater cord and plug connections with
each use
!
1.
MAKE SURE
the plug fits tig h
t in the outlet! Faulty wall
outlet connections or loose plugs can cause the outlet to
overheat.
2.
Heaters draw more current
than small appliances.
Overheating
may occur even if it has not occurred with the
use of other appliances.
3. During use
check frequently
to see if the
plug outlet or
faceplate
is
HOT
!
4. If the outlet or faceplate is HOT,discontinue use immediately
and have a qualified electrician inspect and/or replace the
faulty outlets.
This heater has a three-blade grounding type plug as show in
below picture. If there is a two-slot receptacles only, an adapter
should be used for connecting three-blade grounding type plugs.
The grounding lug extending
from the adapter must be
connected to a permanent
ground such as a properly
grounded outlet box by a
m eta l s c rew. T h e a d a pte r
should not be used if a three-
slot grounded receptacle is
available.
SAVE THESE INSTRUCTIONS!
Adapter
Grounding
Pin
Metal
Grounding
Screw
Summary of Contents for EF262-265A
Page 2: ......