2
To prevent a possible fire,
DO NOT
block air intakes or exhaust in any
manner. Doing so could cause a
fire
.
DO NOT
use on soft surfaces, like
a bed, where openings may become blocked.
As the appliance has
hot and arcing or sparking parts inside
.
DO NOT
use it in areas where
gasoline, paint, or flammable liquids
are used or
stored.
AVOID FIRE!
Regularly inspect all air vents to make sure they are free
from dust, lint, or other blockage.
Unplug the unit
and clean with a
vacuum ONLY
.
DO NOT
rinse or get wet.
DO NOT USE
this appliance with any
solid state speed control devices.
Risk of
electric shock
!
DO NOT OPEN!
No user-serviceable parts inside!
NEVER modify this appliance
. Doing so could result in personal
injury
or property
damage.
Modification of this fireplace
completely voids
all warranties
.
NEVER
leave this appliance unattended.
To disconnect
appliance,
ALWAYS
turn controls to “OFF”
then remove plug from outlet or turn
off circuit
when not in use.
ALWAYS
turn this appliance off before unplugging it from the outlet.
To prevent
a possible
fire
,
do not
burn wood
or other materials
in
this appliance.
ALWAYS
disconnect
this unit from the
power
supply
before
performing any assembly or cleaning, or before relocating the electric
fireplace.
Always use
properly grounded,
fused
and polarized outlets.
Always use
ground fault protection
where required by electrical code.
Avoid
use
of an
extension cord
because an extension cord may
overheat and cause a fire. However if you have to use an extension
cord, the cord should be
No.14 AWG minimum size
and rated to not
less than 1875watts.
NEVER
plug this appliance into an outlet that is
old
,
cracked
, or has
any
loose wires or connections
. Plugging this appliance into a faulty
outlet could result in
electric
arcing
within the outlet that could cause
the
outlet
to
overheat or catch
fire
.
