Legend 780 Owner'S Manual Download

Page: 15 / 41

KOYKER LEGEND 780 SL LOADER SPECIFICATIONS

Description of Equipment Rated

Loader Model

...................................................................................................................

780 SL

Attachment Adapter & Bucket Size

.....................................................................................

6’

Rated Flow

......................................................................................................................

25 GPM

Maximum Pressure

........................................................................................................

2500 PSI

Lift Cylinder Dia.

.........................................................................................................

3 1/4” Bore

Attachment Cylinder Dia.

............................................................................................

3 1/4” Bore

Tractor Horsepower Range

...........................................................................................

180 HP

Dimensional Specifications

(A) *Maximum Lift Height to Pivot Pin

..........................................................................

13’ 9”

(B) *Lift Height under Level Bucket

..............................................................................

12’ 11”

.....................................................................

10’ 8”

(D) *Reach at Maximum Lift Height

................................................................................

DNA

(E) Maximum Dump Angle

................................................................................................

(F) *Reach with Bucket on Ground

..................................................................................

DNA

(G) Maximum Rollback Angle

...........................................................................................

(H) *Digging Depth

.............................................................................................................

5”

(J) *Overall Height in Carry Position

...............................................................................

7’ 2”

Operational Specifications

(U) *Lift Capacity to Maximum Height at Pivot Pin

....................................................

5067 lbs.

(V) *Lift Capacity to Maximum Height 31.5” Forward of Pivot Pin

............................

3527 lbs.

(Y) *Breakout Force at Ground Line at Pivot Pin

.........................................................

6802 lbs.

(Z) *Breakout Force at Ground Line 31.5” Forward of Pivot Pin

.................................

5059 lbs.

*Raising Time

................................................................................................................

5 seconds

*Lower Time

..................................................................................................................

3 seconds

*Attachment Dumping Time

.........................................................................................

4 seconds

*Attachment Rollback Time

..........................................................................................

3 seconds

*Specifications based on ASABE standards S301.3 (Front

End Agricultural Loader Ratings) The above

information is based on testing done by Koyker Mfg. Variations in maximum lift height and other specs for
different tractors are due to tire sizes, variations in loader mounting locations and hydraulic system
efficiency.

Specifications are subject to change without notice and without liability therefore.

Page 13

SPECIFICATIONS

Summary of Contents for 780










































Search results

Summary of Contents for 780

Reviews:

Related manuals for 780

Brands by name

Popular brands

Legend 780, Owner'S Manual

Search results

Summary of Contents for 780

Reviews:

Related manuals for 780

Brands by name

Popular brands