Legend LDVD5.1A, User Manual

Once your DVD player is connected with your TV and the power supply plugs of various 
devices have been plugged into the power sockets, and the batteries have already been 
inserted into the remote control, you are ready to operate the DVD player.
     Turn on the power supply to the TV.

1. Press POWER button on DVD player to turn on power.
    Wait a moment and switch the TV to the relevant video input mode (VIDEO IN) with the 
TV remote control.
2. Press OPEN/CLOSE button on the player or press      button on the remote control to eject 
the disc tray.
    When the tray is automatically ejected, place the disc in the tray with the label side facing 
up (see the following). You can only place one disc each time.

3. Press PLAY button
    The player will retract automatically the tray and start reading the disc, recognize the 
different format automatically and display the results on the VFD in the front panel of the 
player. Then the player starts the playback of the disc content automatically. If content or 
menu appears, you can use the UP, DOWN, LEFT, RIGHT buttons on the remote control to 
specify the items to be played, then press ENTER button to start the playback or select 
directly with numbers.

Press MUTE button to turn off the audio output of the player.
Press MUTE button again to turn it on. 

During the playback, press or VOLUME- button to adjust the volume of the 
player.

During playback, press PAUSE      button to pause the playback, press     PLAY or PAUSE to 
resume play. 

5