14
Basic Operation
Turning the TV On and Off
Connect the power adapter to wall AC Outlet. A front mounted indicator light
will be illuminated red indicating the TV has power.
Press the POWER button on the remote control or the TV set. The TV’s indicator
light will be illuminated green indicating the TV is turned ON.
Press the POWER button again to turn the TV off. A front mounted indicator
light will be illuminated red indicating the TV is off.
Source selecting
The unit incorporates multiple input sources which can be
selected via the INPUT button on the television or remote. Press
the INPUT button to enter Input menu, as shown right.
Use the
▲▼
direction buttons and the ENTER button
On the input menu, press the
▲▼
direction button to select
the desired input source. After several seconds, the TV will
enter the selected source.
Or after you selected the desired source press the ENTER button to enter the
selected source immediately.
Use the INPUT button and the ENTER button
On the input menu, press the INPUT button repeatedly to select the desired
input source. After several seconds, the TV will enter the selected source.
Or after you selected the desired source press the ENTER button to enter the
selected source immediately.
Channel Selection
1.
Using CH
▲
/
▼
button
2.
You have also quick access to the different TV channels by using the numeric
buttons.
3.
Using LAST button on the remote control to view the last channel you were
watching.
The First Time Installation
The first time you turn on the TV or after you reset all the settings to their original
status, the Setup Wizard will start automatically. Follow the prompts on the screen
to set the Menu Language, Air/ Cable, Cable System and the Auto Scan, then press
ENTER button and the channel tuning starts immediately.
All found TV programs will be saved into the channel list.
