background image

1

In support of our policy of continuous product improvement we reserve the right to change materials and specifications without notice. Drawings, where used, are not to 

scale. All dimensions are in millimetres and sizes given are approximate. Where possible, technical MSDS data sheets are made available on the website. All products 

should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer 

to website for terms and conditions on warranty.

Thank you for using MSS products. This manual must be read
carefully prior to operating this product. Special attention should be paid
to the section “Safety Instructions”. Damages and injuries caused by
improper use of this product are NOT included in our warranty. We
would like to remind you to work safely and to keep this manual on hand.

Safety Instructions

WARNING

ATTENTION

Follow ALL instructions to ensure safety.

This product is NOT an insulator 
and cannot be used near energized 
conductors.

Do not use this tool on glass, plastic,
wood or any other materials which
could shatter. Do not exceed
equipment ratings.

Always wear safety goggles when
operating this product. Projectiles or
hydraulic fluid can cause serious
injuries.

Read all instructions, warnings, and
cautions carefully. Follow all safety
precautions to avoid personal injury
or property damage.

 

Safety Instructions 

 

 

Follow ALL instructions to ensure safety.

 

 

WARNING 

 

 

 

 

 

 

 

 

 

 

ATTENTION 

 

 

 

 

 

 

 

 

 

 

 
 
 

Read all instructions, warnings, and 
cautions carefully. Follow all safety 
precautions to avoid personal injury 
or property damage. 

Thank you for using

 KuDos® products. This manual must be read 

carefully prior to operating this product. Special attention should be paid 
to the section “Safety Instructions”. Damages and injuries caused by 
improper use of this product are 

NOT included in our warranty. We 

would like to remind you to work safely and to keep this manual on hand. 

Always wear safety goggles when 
operating this product. Projectiles or 
hydraulic fluid can cause serious 
injuries. 

 

This product is 

NOT an insulator and 

cannot be used near energized 
conductors.   

Do not use this tool on glass, plastic, 
wood or any other materials which 
could shatter. 

Do not exceed 

equipment ratings. 

Summary of Contents for MSS-KREC-54AC













Reviews: