3
In support of our policy of continuous product improvement we reserve the right to change materials and specifications without notice. Drawings, where used, are not to
scale. All dimensions are in millimetres and sizes given are approximate. Where possible, technical MSDS data sheets are made available on the website. All products
should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer
to website for terms and conditions on warranty.
Safety Instructions
Work Area Safety
Electrical Safety
Personal Safety
1. Keep the area around the tool
clean and free of obstructions.
2. Keep the area free of flammables
which could ignite while using this
tool.
3. Children and bystanders should
stay clear of the work area to
ensure safety
1. Use only the specified battery
charger for the battery.
2. Use only the designated battery
pack with this tool.
3. Children and bystanders should
stay clear of the work area to
ensure safety
4. Avoid electrical shock. Do not
touch grounded metal
conductors while operating
this tool.
5. Do not use this tool in wet
conditions. Store this tool in a
dry place.
6. Do not drop or in any way abuse
or disassemble the battery pack
or charger.
1. Stay alert while using this tool to
prevent serious injury. Do not use
under the influence of drugs,
alcohol or medicine.
2. Do not wear loose hair or clothes
that can get caught in the tool
while operating.
3. To reduce the risk of injury, wear
non-conductive gloves and
non-skid safety-shoes. Always
wear protective eyewear.
4. Make sure the tool switch is OFF
or the tool locked before inserting
the battery pack.
5. After servicing the tool, remove
adjusting keys or wrenches from
any moving parts of the tool
before use.
6. Work safely. Maintain your balance
and do not reach while operating
the tool.
