13
After each use
•
Put aside parts that don’t come in contact with breastmilk.
When used correctly, tubing does not come in contact with breastmilk
and does not need to be cleaned.
•
Disassemble all other parts (silicone cushion, silicone diaphragm, cap and bottle).
•
Rinse with cold water soon after use.
•
Wash in warm soapy water.
The silicone cushion can be cleaned by gently rubbing between fingers.
•
Rinse well.
•
Shake off excess water and air-dry on a dedicated rack or clean cloth.
How to sanitize
•
Follow cleaning instructions from the above section.
•
Submerge parts in pot of water and boil for 3-5 minutes.
Use large pot to prevent parts from touching sides or bottom of pot.
•
Shake off excess water and air-dry on a dedicated rack or clean cloth.
After first sanitizing all parts (except tubing), please do not boil
silicone parts again. Do not steam, sterilize, or dish wash silicone parts.
For longer lifespan of your silicone parts, hand wash only after first
use. UV sterilization or cold sterilization is acceptable, as well.
