Janu
ary 201
9
148 Legrand PDU User Guide
SSH:
You need to enter the SSH public key only if the public key authentication for SSH is enabled. See
Changing SSH Settings
(on page 177).
1. Open the SSH public key with a text editor.
2. Copy and paste all content in the text editor into the SSH Public Key field.
SNMPv3:
The SNMPv3 access permission is disabled by default.
Field/setting
Description
Enable SNMPv3
Select this checkbox when intending to permit the
SNMPv3 access by this user.
Note: The SNMPv3 protocol must be enabled for
SNMPv3 access. See
Configuring SNMP
Settings
(on page 175).
Security Level
Click the field to select a preferred security level
from the list:
None: No authentication and no privacy. This
is the default.
Authentication: Authentication and no privacy.
Authentication & Privacy: Authentication and
privacy.
Authentication Password
: This section is configurable only when 'Authentication' or 'Authentication &
Privacy' is selected.
Field/setting
Description
Same as User
Password
Select this checkbox if the authentication
password is identical to the user's password.
To specify a different authentication password,
disable the checkbox.
Password,
Confirm Password
Type the authentication password if the 'Same as
User Password' checkbox is deselected.
The password must consist of 8 to 32 ASCII
printable characters.
Privacy Password
: This section is configurable only when 'Authentication & Privacy' is selected.
Field/setting
Description
Same as
Authentication
Password
Select this checkbox if the privacy password is
identical to the authentication password.
To specify a different privacy password, disable
the checkbox.
Password,
Confirm Password
Type the privacy password if the 'Same as
Authentication Password' checkbox is deselected.
The password must consist of 8 to 32 ASCII
printable characters.
