Janu
ary 201
9
Legrand PDU User Guide 221
a. Host
name
b. Port
number
c. User ID for accessing the host -- make sure the User ID has the SNMPv3 permission.
d. Select the host security level
Security level
Description
"noAuthNoPriv"
Select this if no authorization or privacy protocols
are needed.
"authNoPriv"
Select this if authorization is required but no
privacy protocols are required.
Select the authentication protocol - MD5 or
SHA
Enter the authentication passphrase and then
confirm the authentication passphrase
"authPriv"
Select this if authentication and privacy protocols
are required.
Select the authentication protocol - MD5 or
SHA
Enter the authentication passphrase and
confirm the authentication passphrase
Select the Privacy Protocol - DES or AES
Enter the privacy passphrase and then confirm
the privacy passphrase
Start or Stop a Lua Script
If you have created or loaded a Lua script file into the Legrand PDU, you can have that script automatically
run or stop in response to a specific event.
For instructions on creating or loading a Lua script into this product, see
Lua Scripts
(on page 248).
To automatically start or stop a Lua script:
1. Choose Device Settings > Event Rules >
.
2. Select "Start/stop Lua script" from the Action list.
3. In the Operation field, select Start Script or Stop Script.
4. In the Script field, select the script that you want it to be started or stopped when an event occurs.
No script is available if you have not created or loaded it into the Legrand PDU.
5. To apply different arguments than the default, do the following. Note that the newly-added arguments will
override this script's default arguments.
a. Click
.
b. Type the key and value.
c. Repeat the same steps to enter more arguments as needed.
To remove any existing argument, click
adjacent to it.
