Janu
ary 201
9
Legrand PDU User Guide 347
Customizing the Date and Time
If intending to manually configure the date and time, use the following CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to customizing the date and time. See
Determining the Time Setup Method
(on page 345).
Assign the date:
config:#
time set date <yyyy-mm-dd>
Assign the time:
config:#
time set time <hh:mm:ss>
Variables:
Variable
Description
<yyyy-mm-dd>
Type the date in the format of yyyy-mm-dd.
For example, type
2015-11-30
for November 30,
2015.
<hh:mm:ss>
Type the time in the format of hh:mm:ss in the
24-hour format.
For example, type
13:50:20
for 1:50:20 pm.
Setting the Time Zone
The CLI has a list of time zones to configure the date and time for the Legrand PDU.
config:#
time zone
After a list of time zones is displayed, type the index number of the time zone or press Enter to cancel.
Example
To set the time zone:
1. Type the time zone command as shown below and press Enter.
config:#
time zone
2. The system shows a list of time zones. Type the index number of the desired time zone and press Enter.
3. Type
apply
for the selected time zone to take effect.
