Janu
ary 201
9
Legrand PDU User Guide 351
config:#
security ipAccessControl ipv6 rule add <direction> <insert> <rule_number>
<ip_mask> <policy>
Variables:
<direction> is one of the options:
in
or
out
.
Direction
Description
in Inbound
traffic.
out Outbound
traffic.
<ip_mask> is the combination of the IP address and subnet mask values (or prefix length), which are
separated with a slash. For example, an IPv4 combination looks like this:
192.168.94.222/24
.
<policy> is one of the options:
accept,
drop
or
reject
.
Policy
Description
accept
Accepts traffic from/to the specified IP
address(es).
drop
Discards traffic from/to the specified IP
address(es), without sending any failure
notification to the source or destination host.
reject
Discards traffic from/to the specified IP
address(es), and an ICMP message is sent to the
source or destination host for failure notification.
<insert> is one of the options:
insertAbove
or
insertBelow
.
Option
Description
insertAbove
Inserts the new rule above the specified rule
number. Then:
new rule's number = the specified rule number
insertBelow
Inserts the new rule below the specified rule
number. Then:
new rule's number = the specified rule 1
<rule_number> is the number of the existing rule which you want to insert the new rule above or below.
Modifying a Firewall Rule
Depending on what to modify in an existing rule, the command varies.
IPv4 commands
Modify an IPv4 rule's IP address and/or subnet mask:
config:#
security ipAccessControl ipv4 rule modify <direction> <rule_number> ipMask
<ip_mask>
Modify an IPv4 rule's policy:
