Janu
ary 201
9
214 Legrand PDU User Guide
Action
Function
Send snapshots via
email
Emails the snapshots captured by a connected
Logitech
®
webcam (if available). See
Send
Snapshots via Email
(on page 218).
Send SNMP
notification
Sends SNMP traps or informs to one or
multiple SNMP destinations. See
Send an
SNMP Notification
(on page 219).
Start/stop Lua script
If you are a developer who can create a Lua
script, you can upload it to the Legrand PDU,
and have the Legrand PDU automatically
perform or stop the script in response to an
event. See
Start or Stop a Lua Script
(on
page 220).
Switch outlets
Switches on, off or cycles the power to the
specified outlet(s). See
Switch Outlets
(on
page 221).
Switch outlet group
Switches on, off or cycles the power to all
outlets of the specified outlet group. See
Switch Outlet Group
(on page 221).
Switch peripheral
actuator
Switches on or off the mechanism or system
connected to the specified actuator. See
Switch Peripheral Actuator
(on page 221).
Syslog message
Makes the Legrand PDU automatically forward
event messages to the specified syslog server.
See
Syslog Message
(on page 222).
4. Enter the information as needed and click Create.
5. Then you can assign the newly-created action to an event rule or schedule it. See
Event Rules and
Actions
(on page 199).
Alarm
The Alarm is an action that requires users to acknowledge an alert. This helps ensure that the user is aware
of the alert.
If the Alarm action has been included in a specific event rule and no one acknowledges that alert after it
occurs, the Legrand PDU resends or regenerates an alert notification regularly until the alert is
acknowledged or the maximum number of alert notifications is sent.
For information on acknowledging an alert, see
Dashboard
(on page 95).
Operation:
1. Choose Device Settings > Event Rules >
.
2. Select Alarm from the Action list.
3. In the Alarm Notifications list box, specify one or multiple ways to issue the alert notifications. Available
methods vary, depending on how many notification-based actions have been created. Notification-based
action types include:
Syslog
message
Send
If no appropriate actions are available, create them first.
a. To select any methods, select them one by one in the Available field.
To add all available methods, simply click Select All.
b. To delete any methods, click a method's
in the Selected field.
