Janu
ary 201
9
Legrand PDU User Guide 231
Placeholder
Definition
[EVENTRULENAME]
The name of the matching event rule
[EXTSENSOR]
The peripheral device identifier
[EXTSENSORNAME]
The name of a peripheral device
[EXTSENSORSLOT]
The ID of a peripheral device slot
[FAILURETYPE]
The numeric hardware failure type
[FAILURETYPESTR] The
textual hardware failure type
[IFNAME]
The human readable name of a network interface
[INLET]
The power inlet label
[INLETPOLE]
The inlet power line identifier
[INLETSENSOR]
The inlet sensor name
[ISASSERTED]
Boolean flag whether an event condition became true
(1) or false (0)
[LDAPERRORDESC]
An LDAP error occurred
[LOGMESSAGE]
The original log message
[MONITOREDHOST]
The name or IP address of a monitored host
[OCP]
The overcurrent protector label
[OCPSENSOR]
The overcurrent protector sensor name
[OCPTRIPCAUSELABEL]
The label of the outlet that likely caused the OCP trip
[OLDVERSION]
The firmware version the device is being upgraded
from
[OUTLET]
The outlet label
[OUTLETGROUPID]
The outlet group ID
[OUTLETGROUPNAME]
The outlet group name
[OUTLETGROUPSENSOR] The
outlet group sensor name
[OUTLETNAME]
The outlet name
Note: If any outlet does not have a name, neither an
outlet name nor an outlet number will be shown in the
custom message for it. Therefore, it is recommended
to check the availability of all outlet names if
intending to use this placeholder.
[OUTLETPOLE]
The outlet power line identifier
[OUTLETSENSOR]
The outlet sensor name
[PERIPHDEVPOSITION]
The position of an attached peripheral device
[PHONENUMBER]
The phone number an SMS was sent to
[PORTID]
The label of the external port, the event triggering
device is connected to
[PORTTYPE]
The type of the external port (for example, 'feature' or
'auxiliary'), the event triggering device is connected to
