Janu
ary 201
9
312 Legrand PDU User Guide
Authentication Settings
General authentication settings:
This command displays the authentication settings of the Legrand PDU, including both LDAP and Radius
settings.
#
show authentication
One LDAP server's settings:
To show the configuration of a specific LDAP server, assign the desired LDAP server with its sequential
number in the command. To get detailed information, add "details" to the end of the command.
#
show authentication ldapServer <server_num>
-- OR --
#
show authentication ldapServer <server_num> details
One Radius server's settings:
To show the configuration of a specific Radius server, assign the desired Radius server with its sequential
number in the command. To get detailed information, add "details" to the end of the command.
#
show authentication radiusServer <server_num>
-- OR--
#
show authentication radiusServer <server_num> details
Variables:
<server_num> is the sequential number of the specified authentication server on the LDAP or Radius
server list.
Displayed information:
Without specifying any server, Legrand PDU shows the authentication type and a list of both LDAP and
Radius servers that have been configured.
When specifying a server, only that server's basic configuration is displayed, such as IP address and
port number.
With the parameter "details" added, detailed information of the specified server is displayed, such as an
LDAP server's bind DN and the login name attribute, or a Radius server's timeout and retries values.
