Janu
ary 201
9
408 Legrand PDU User Guide
Specifying the EnergyWise Domain
This command syntax specifies to which Cisco
®
EnergyWise domain the Legrand PDU belongs.
config:#
energywise domain <name>
Variables:
<name> is a string comprising up to 127 ASCII printable characters. Spaces and asterisks are NOT
acceptable.
Specifying the EnergyWise Secret
This command syntax specifies the password (secret) to enter the Cisco
®
EnergyWise domain.
config:#
energywise secret <password>
Variables:
<password> is a string comprising up to 127 ASCII printable characters. Spaces and asterisks are NOT
acceptable.
Changing the UDP Port
This command syntax specifies the UDP port for communications in the Cisco
®
EnergyWise domain.
config:#
energywise port <port>
Variables:
<port> is the UDP port number ranging between 1 and 65535.
Setting the Polling Interval
This command syntax determines the polling interval at which the Cisco
®
EnergyWise domain queries the
Legrand PDU.
config:#
energywise polling <timing>
Variables:
<timing> is an integer number in seconds. It ranges between 30 and 600 seconds.
Example - Setting Up EnergyWise
The following command sets up two Cisco
®
EnergyWise-related features.
config:#
energywise enabled true port 10288
Results:
The EnergyWise feature implemented on the Legrand PDU is enabled.
The UDP port is set to 10288.
