15/16
ELIOT Kit STOP&GO Connected
Cat. N°: 4
149 54
9. APPLICATION MESSAGES
. Hereunder are listed messages displayed by the Smartphone app, their meaning and possible actions to be done by the user
1.
Associated device is “OFF” and Stop& Go in AUTO mode.
Remote reclosing command (closing of the circuit) allowed
2.
A non-permanent fault occurred
Remote reclosing command (closing of the circuit) allowed
Remote command allowed
3.
Stop&Go has been open manually
Remote reclosing command (closing of the circuit) not-allowed
Close manually the Stop&Go
4.
A “too recurrent” non
-permanent fault has been detected
Remote reclosing command (closing of the circuit) not-allowed
Contact your electrician to check your installation
5.
Stop&Go detects a permanent fault after an OFF remote operation
or a tripping of the associated device
Remote reclosing command (closing of the circuit) not-allowed
Contact your electrician to check your installation
6
Stop&Go is in MAN mode
Remote reclosing command (closing of the circuit) not-allowed
Put selector in “AUTO” position
Technical data sheet: F02465EN/01
Updated: 28/03/2019
Created: 06/10/2016