40
5.5.3 Schedule menu
After system booted up, it is in default 24-hour regular mode.
You can set record type and time in the MAIN MENU -> SETTING -> SCHEDULE,
See below.
1 - Channel:
select the channel number first. You can select “all” if you want to set for the whole channels.
2 - Week day:
there are eight options: ranges from Saturday to Sunday and all.
3 - Pre-record:
system can pre-record the video before the event occurs.
The value ranges from 1 to 30 seconds depending on the bit stream.
4 - Redundancy: system supports redundancy backup function. It allows you backup recorded file in two disks.
You can highlight “Redundancy” box to activate this function.
Before enable this function, set at least one HDD as redundant in MAIN MENU -> ADVANCED
-> HDD MANAGE. Refer to HDD manage chapter for more detailed information.
5 - Snapshot:
you can enable this function to take a snapshot when an alarm occurs.
For setting, refer to “auxiliary functions” chapter.
6 - Record types: there are four types: Regular, Motion Detection (MD), Alarm and MD & alarm.
At the bottom of the menu, there are color bars for your reference.
Green color stands for regular recording, yellow color stands for motion detection and red color
stands for alarm recording.
The white means the MD and Alarm record is setting.
Once you have set to record when the MD and alarm occurs, system won’t record if only
motion detect occurs or if only the alarm occurs.
1
2
3
4
5
6
