46
•
IP multiple to cast group address
-224.0.0.0-239.255.255.255
-“D” address space
•
The higher four-bit of the first byte=”1110”
•
Reserved local multiple cast group address
-224.0.0.0-224.0.0.255
-TTL=1 When sending out telegraph
-For example
224.0.0.1
All systems in the sub-net
224.0.0.2
All routers in the sub-net
224.0.0.4
DVMRP router
224.0.0.5
OSPF router
224.0.0.13 PIMv2 router
•
Administrative scoped addressees
-239.0.0.0-239.255.255.255
-Private address space
•
Like the single broadcast address of RFC1918
•
Cannot be used in Internet transmission
•
Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other addresses. For example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged in the Web, the Web can automatically get multiple cast address and add it to the multiple cast groups.
You can enable real-time monitor function to view the view.
4) PPPoE
PPPoE interface is shown below
Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider).
Click on the “Save” button, you need to restart to activate your configuration.
After rebooting, the DVR will connect to internet automatically.
The IP in the PPPoE is the DVR dynamic value. You can access this IP to visit the unit.
5) DDNS Setup
DDNS setup interface is shown as below
You need a PC with fixed IP in the internet and there is the DDNS software running in this PC.
In network DDNS, please select DDNS type and highlight enable item. Then input your PPPoE name you get from you
IPS and server IP (PC with DDNS ). Click on “Save” button and then reboot system.
Click on the “Save” button, system prompts for rebooting to get all setup activated.
