49
5 - Anti-dither:
System only memorizes one event during the anti-dither period.
The value ranges is from 1 to 600 seconds.
6 - Alarm output:
When alarm occurred, system enables peripheral alarm devices.
7 - Latch:
You can set delay duration, system automatically delays specified seconds in turning off
alarm and activated output after external alarm cancelled.
The value range is from 10 to 300 seconds.
8 - Show message:
System can pop up a message to alarm you in the local host screen if you enabled
this function.
9 - Alarm upload: System can upload the alarm signal to the network (including alarm centre) if you enabled
current function.
10 - Send email:
System can send out email to alert you when alarm occurs.
You have to configure SMTP and email setting (SETTING -> NETWORK -> Advanced Setting EMAIL).
11 - Record Channel: You can select proper channel to record alarm video (Multiple choices).
At the same time you need to set MD in schedule interface
(MAIN MENU -> SETTING -> SCHEDULE) and select schedule record in record interface
(MAIN MENU -> ADVANCED -> RECORD).
12 - PTZ activation: The system can go to defined preset when there is an alarm.
Click on “Select” button. Input “Preset” and the number preset.
13 - Tour:
You can enable tour function in one window when alarm occurs.
Go to MAIN MENU -> SETTING -> DISPLAY to set the tour interval.
14 - Snapshot:
You can enable this function to snapshoot image when alarm occurs
(see the “auxiliary function” chapter).
15 - Video matrix: Once you enable this function, the selected alarm channel will be displayed in the
spot video channel.
16 - Buzzer:
Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
Highlight box
to select the corresponding function. After setting all the setups please click on the “Save” button,
system goes back to the previous menu.
