99
Parameter
Function
Ethernet
Please select the network card first.
DHCP
Dynamically get IP address. You can get the device IP from the DHCP server if you ena-
bled this function.
TCP Port
Default value is 37777.
HTTP Port
Default value is 80.
UDP Port
Default value is 37778.
Max Connection
Network user max amount. The value ranges from 0 to 10.
O means there is no user can access current device.
Remote
Host
Multiple
cast group
•
Set MULCAST address and port.
•
Enable MULCAST function.
PPPOE
•
Input the PPPoE user name and password you get from the IPS (internet service
provider) and enable PPPoE function. Please save current setup and then reboot
the device to get the setup activated.
•
Device connects to the internet via PPPoE after reboot. You can get the IP address
in the WAN from the IP address column.
•
Please Note if you want to reboot the device please make sure you have proper
reboot right and there is no login user in current device.
a- Email
The email interface is the following interface
