background image

INTRODUCTION

This remote keyboard is an accessory for PTZ dome camera, etc 
It allows the user to control from 1 to 255 cameras.

1. Features 

•  Controls from 1 to 255 cameras. 
•  Multiple protocol supported in each channel (CMT, WDS,WCY, CYN, WSL, Pelco).  
•  RS  485/RS-422 communication (Tx : 3 port , Trx :1 port).
•  Programmable user preferences. (preset, tour, group, etc.).
•  Built-in  3-Axis proportional joystick
•  Easy upload programmed data via serial communication port of PC.
•  Built-in 2 lines character LCD.
•  User password support.
•  Designed for desktop use
•  Programmable transmission speed for each ID. (2.4~57.6kbps)

 

Note: units should be set to the communication protocol and the same baud rate.

2.  Hardware Overview

 Hardware 

Components

•  This remote keyboard contains easy to use control keys on the front and simple input and output connectors  
  on the back

 

Control buttons & connection

•  The unit provides the primary operator interface. Most operations are one or two buttons presses. 

•  The following table contains a description for each buttons on the keyboard and port of cable connection. 

 

  Use Figure 1 and Figure 2 as a reference.

Figure 1

 4

Summary of Contents for 4 306 03














Reviews: