(*) or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the same type and make.
(
**
)
Using only transformers intended for operation with electronic switches. Take account of tranformer
losses for power calculations. Transformers should be charged to over 60% of their rated power..
In dimmer option operating mode (wich can be activated via the App), this
switch functions only with dimmable bulbs (identifiable by the logo on
packaging).
LE10667AA
This pack is a connected accessory which requires you to buy and install the Valena Life
with Netatmo connected starter pack first.
Pack contents
In default mode (on/off), this switch works with the following types of bulb :
0 401 49
100/240 V~
50/60 Hz
11 mA
- 5° C + 55° C
Finishing plate
Site protection
Connected switch
(with dimmer option)
+ bleeder
Characteristics
LED
Dimmable
100-240 VAC
50/60 Hz
2 x 2,5 mm2
240 VAC
Max.
300 W
(*)60 W
60 W
300 VA
300 VA
Min.
7 W
5 W
9 W
10 VA
35 VA
100 VAC
Max.
150 W
(*)30 W
30 W
150 VA
150 VA
Min.
7 W
5 W
9 W
10 VA
35 VA
+ 45°C
+ 5°C
(
**
)
Connected switch
7 521 84 - 7 522 84 - 7 523 84
2
To control a light with two or more switches,
only use the products:
Tip if replacing a two-
way switch:
old flush-mounted
switch replaced by the
wireless switch.
x 1
AND
x 1
or several
Connected switch (with dimmer option)
+ bleeder
Wireless switches for all control points
(not included in this pack)
Do not use: two connected switches (with dimmer option) to control
the same lighting point.
Before you start: wiring precautions
If you plan to install two-way light switches or switched power outlets,
read the following precautions:
Use a connector to
connect all 3 wires
together (travellers 1 and
2 and lamp return wire).
Traveller 2
Wire which goes back
to the light
Traveller 1
