background image

Cat. no(s).:  882 30

Configuration tool with screen

Technical data sheet: F01163EN/00

Updated on: 

Created on: 23/08/2010

5/5

CONTENTS

Languages

Français

Italiano

Español

English

3. NAVIGATION (continued)

3.2 Instructions for use (continued)
3.2.6 Settings

4. STANDARD EN12464-1 RECOMMENDATIONS

Commercial premises - office buildings:
Passage areas and corridors: 100 lux 
Stairways: 150 Lux
Canteens: 200 lux
Infirmary: 500 Lux
Warehouse: 100 Lux
Offices: 300 - 500 lux 
Conference rooms: 500 lux 
Reception areas: 300 lux 
Technical drawing: 750 lux 
Manufacturing areas:
Packaging rooms: 300 lux 
Visual work in manufacturing: 1000 lux 
Assembly line: 1500 lux 
Storerooms:
Sales areas: 300 lux 
Cash-desk areas: 500 lux
Other examples:
Full moon at night: 0.5 lux
Well-lit street at night: 20 - 70 lux
Living premises: 100 - 200 lux
Well-lit apartment: 200 - 400 lux
Working premises: 200 - 3,000 lux
Stadium at night: 1,500 lux
Outside with cloudy sky: 25,000 lux
Outside in full sunshine: 50,000 to 100,000 lux

5. MAINTENANCE

Do not use: acetone, tar-removing cleaning agents or 
trichloroethylene.
Maintenance with the following products:  - Hexane (EN 60669-1), 

- Methylated spirit, 
- Soapy water, 
- Diluted ammonia, 
- Bleach diluted to 10%, 
- Window-cleaning products.

6. STANDARDS

Directive: CE
Product standard: IEC 60669-2-1
Environmental standards: 
-  EU Directive 2002/96/EC: 

(Waste Electrical and Electronic Equipment) - WEEE

-  EU Directive 2002/95/EC: 

RoHS (Restriction of Hazardous Substances).

ATTENTION:  An initial test is required for the use of other special 

maintenance products.

Note:  

All technical information is available at

 

www.legrandoc.com

Files

PnL sensor

Test

Setting

Settings

6

Languages

Version

Battery

A

C

B

Version

Firmware: X.X.XX

B

A

Battery level

C

Summary of Contents for 882 30






Reviews: