Installation Instructions
LFE1U
11
Figure 13
10. Snap off plastic straps on anchor at wall by pushing side to
side, snapping off straps level with flange of plastic cap.
(See Figure 14)
Figure 14
11. Repeat Steps 7 through 10 for the other mounting hole not
on stud.
12. Place wall brackets (B1) over anchors and drilled holes and
align mounting slots on mount with holes in anchors and
wall. (See Figure 15)
13. Install two 5/16 x 2 3/4" hex head tapping bolts (Q) through
corresponding mounting slots on mount and into drilled
holes on wood stud. DO NOT overtighten! (See Figure 15)
14. Install two 5/16-18 x 3 3/4" Phillips pan machine screws (M)
through 3/16 washers (N) and slots on wall bracket (B1) and
into toggler anchors (L). (See Figure 15)
15. Position column assembly (P) inside two installed wall
brackets (B1). (See Figure 15)
Figure 15
16. Install four 5/16 x 1/2” button head cap screws (X) through
holes on wall brackets (B1) and side of column assembly
(P). (See Figure 16)
Figure 16
Installing to Steel Stud Wall
(L)
Plastic Cap
Drywall
Anchor Metal Channel
SIDE VIEW
8
9
Plastic Straps
Drywall
Anchor Metal Channel
Plastic Cap
SIDE VIEW
10
13
14
(Q) x 2
(M) x 2
(N) x 2
15
(X) x 4
16
(P)
