OLCM1U
Installation Instructions
8
6.
Use four 1/4-20 x 5/8" button head cap screws (Z) and four
1/4" washers (CC) to secure two side wind shields (J) to
center wind shield (K). (See Figure 8)
7.
Tighten all six screws (Z).
Figure 8
8.
Use four 5/16-18 hex nuts (AA) and four 5/16" washers (BB)
to secure four wind shield connectors (pre-installed) to side
wind shields (J). (See Figure 9)
Figure 9
Attaching Interface Brackets to Display
1.
Lower the latch mechanism on each interface bracket (L).
(See Figure 10)
Figure 10
2.
Align the center of the interface bracket (L) with center of
screen. (See Figure 11)
NOTE:
The diamond-shape hole in the bracket corresponds to
the center of the mount.
Figure 11
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
3.
Select correct screws, spacers (if necessary) and universal
washers from the hardware bag (A-G) and attach brackets
(L) to back of screen. (See Figure 11)
6
(CC) x 4
(K)
(Z) x 4
(J ) x 2
(Center wind shield
hidden for transparency)
(AA) x 4
8
(BB) x 4
(J) x 2
(L) x 2
1
Latch
mechanism
Center of
bracket
(E or F) x 4
(A-D) x 4
(L) x 2
3
2
(G) x 4
(if necessary)
