301 Fulling Mill Road, Suite G
Middletown, PA 17057
(800) 223-4162
©Copyright 2016 by Legrand,
Inc All Rights Reserved.
www.legrand.us
Page
30
F-2. FTP Server
The IP address of FTP Server.
F-3. Username
The username used to log into the FTP server.
F-4. Password
The password used to log into the FTP server.
F-5. FTP Port
The port number for file transmission protocol. (Default value is 21)
F-6. Path
The ftp path where the user wants to save the information.
Finally, click
Test
to see if the settings are correct.
G. DHCP Server Setup
G-1. Enabled
Tick the Enabled box to enable or disable the DHCP Server function. Once the function is
activated, the NVR can act as the DHCP server. It will assign or distribute one of the IP
addresses according to the setup IP address range (start and end IP Address.) to the
connecting IP CAM (setup DHCP function).
G-2. Start IP Address
Use the virtual keypad to insert the start IP Address of DHCP server.
G-3. End IP Address
Use the virtual keypad to insert the end IP Address of DHCP server.
G-4. Lease Time
Input the lease time of DHCP server.
