Page
2
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
1.3 Panel Layout
1.3.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs are located on the front panel (View from left to right).
Name
Status
Indication
PWR
Off
Power is off.
On
Power is on.
SYS
Flashing
The Router is working properly.
On /Off
The Router has a system error.
WLAN
Off
The Wireless function is disabled.
Flashing
The Wireless function is enabled.
WAN /LAN 1-4
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but there
is no activity.
Flashing
There is an active device linked to the corresponding port.
WPS
Slow Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
Quick Flash
A wireless device failed to be added to the network by WPS
function.
Table 1-1 The LEDs Description
Note:
1.
After a device is successfully added to the network by WPS function, the WPS LED will
stay on for about 5 minutes and then turn off.
2.
Press and hold the WPS/Reset button for more than 5 seconds, to reset the router.
DA2154-V1