Page
8
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
4.
Configure the IP address manually.
1)
Select
Use the following IP address
.
2)
Enter 192.168.40.* (* is any integer between 1 to 250) into the
IP address
field,
255.255.255.0 into the
Subnet mask
filed.
3)
Click
OK
to keep your settings.
Figure 3-4
5.
Verify the network connection between your PC and the AP via the
Ping
command. The following
example is in Windows XP Operating System.
1)
Click
Start > Run
tab. Enter
cmd
in the filed and click
OK
.
2)
Type
ping
192.168.40.252
on the screen that displays and then press
Enter
.
If the result displayed is similar to that shown in Figure 3-5 below, the connection between
your PC and the AP has been successfully established.
Figure 3-5
192 . 168 . 40 . 10
Pinging 192.168.40.252 with 32 bytes of data:
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.40.252:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
