unit deScriptiOn
The Miro Decorator Wireless DRD3 Switch incorporates an electro-mechanical
relay that switches the load safely using patented zero-crossing technology.
Miro Wireless
Miro wireless devices use radio signals to communicate with each other
to control lighting and other types of electric loads in selected areas. Miro
wireless devices use the 900MHz band for high-speed control communication.
Using the patented “frequency-agile” Top Dog™ technology, Miro wireless
devices avoid interference with other 900MHz devices, such as cordless
phones and baby monitors.
load types
Use the DRD3 for the following load types, up to the maximum load rating for
the input voltage:
• Conventional (non-dimmable) fluorescent ballasts
• Discharge lighting fixtures
• Fixtures with integral dimmers
• AC motors and pumps (120VAC only)
cAutiOn
to reduce the risk of
overheating and possible
damage to other equipment, do not
install to control a receptacle.
cAutiOn
Afin de réduire le risque de
surchauffe et la possibilité
d’endommager d’autres
matériels, ne pas installer
pour commander une prise.
