3
before you start
Review this guide in its entirety before beginning device installation Consult an
electrician with any questions or if you are unsure of your abilities
D
Warning: Incorrect installation could
result in death, serious injury, and/or
damage to your home or devices
D
Caution: To reduce the risk of injury
and/or overheating and damage to other
equipment:
• For dry, indoor use only
• Do not use to power medical equipment
• Not suitable as a disconnecting means
• Do not use with loads exceeding the
device load rating (see page 24)
• Connect the smart switch to a
120 VAC, 60 Hz power source ONLY
• Always use copper wire to install the
smart switch and follow all applicable
local and national electrical codes
• Install in a non-metallic electrical box
to protect wireless signal strength
Visit the Legrand website at
www legrand us/radiant/homekit aspx
to learn more about
your smart device
Summary of Contents for HKRP10
