(
Note:
Laser marking is done on front of mechanism for guidance)
1. Pick the button with the desired coloured LED lens: Red or Blue
2. Check the wall plate orientation: Vertical or Horizontal. See fig. D.
3. Clip the button
and
press firmly
on the mechanism. See fig. A and B.
4. Clip the ring.See fig. C.
5. Clip the assembly into the grid and proceed to wiring (Refer to wiring section below).
Horizontal Plate
Vertical Plate
CLICK
CLICK
A
A
B
D
D
C
C
B
Installation (EVM970L series
)
