KEOR COMPACT
DRY CONTACT CARD
4
2. Safety provisions
ATTENTION
It is necessary to read these safety provisions before doing any operation.
DANGER
This product should be installed in compliance with installation rules, preferably by a qualified
electrician. Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take accoun
t of the product’s specific
mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the
instructions. All Legrand products must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorized opening or repair completely cancels all liabilities and the
rights to replacement and guarantees.
Use only Legrand brand accessories.
DANGER
The dry contact card must be installed only with the UPS UNPLUGGED FROM THE MAINS.
ATTENTION
The dry contact card 3 110 99 can only be used in the expansion slot of the UPS KEOR COMPACT
manufactured by LEGRAND.
ATTENTION
It is required to connect the dry contacts of the card by strictly following the instructions provided in this
manual. The UPS and the card may be damaged if the installation and operating procedures are not
followed.
ATTENTION
Inspect the dry contact card immediately after opening the packaging. If it appears damaged, do not
install it inside the UPS but immediately contact the
Technical Service Assistance of LEGRAND
.
In case of problems with the card, you should read this manual before contacting the
Technical Service
Assistance of LEGRAND
.
If the problem persists, contact the
Technical Service Assistance of LEGRAND
that will provide all the
instructions on how to proceed.
