Page 19
ASSEMBLING YOUR TABLE (IF PURCHASED, CONTINUED)
FIGURE AA
There are
3x screw
locations on
each arm.
NOTE
: On 3 Person Arc
tables, there are only 2 arms
facing the back.
There are 2x screw locations
(one on each side) inside of leg
assemblies (behind filler panels).
There are 4x screw
locations on front and
back of trough.
Screw Locations on 3 Person Arc Table
(16x Total)
There are
3x screw
locations on
each arm.
NOTE
: The
3 Person Angle table shown.
On 3 person angle tables
: there are 3x screw locations
on front and back of trough.
On 5 person angle tables
: there are 4x screw locations
on front and back of trough.
FIGURE AB
Screw Locations on 3 and 5 Person Angle Tables
(18x and 20x Total, Respectively)
V
V
11. Use power driver, Phillips bit, and (12x, 6x per panel) #8 x 5/16” pan head sheet metal screws (W)
through holes from the inside of the
trough to attach your modesty panel
pair (X) to corresponding sides of
your table.
(
FIGURE AC
)
NOTE
:The 3 person Arc
table has different
shaped front and
back modesty panels.
However, modesty panels
for 3 and 5 person Angle
tables are different pairs of
the same size panel.
FIGURE AC
NOTE
: This
side of trough
and this
modesty panel
removed on
expanded view
for clarity.
Inside of
Modesty
Panel
Inside of
Trough
W
