Page 5
SUPPLIED COMPONENTS AND HARDWARE
WEIGHT RATINGS
AVERTISSEMENT
: Ce produit est destiné à être utilisé uniquement avec les produits et les poids maximum indiqués. L'utilisation
avec d'autres produits ou produits plus lourds que le poids maximum indiqué peut entraîner une instabilité pouvant causer des
blessures. Le poids total de l'équipement ne doit pas dépasser les quantités indiquées dans le tableau précédent.
WARNING
: This product is intended for use only with the products and maximum weights indicated. Use with other products or
products heavier than the maximum weights indicated may result in instability causing possible injury. Total equipment weight must
not exceed the amounts indicated on the previous table.
If any pieces are missing or damaged, please report it immediately to Technical Support at
av.support@legrand.com or (866) 977-3901.
10” Lever Lock™
Plate
NOTE
: Pre-Installed Inside Display
Stand
E
Display Stand
NOTE
: Free Standing and
Floor-to-Wall models, respectively.
A
CHIEF GRADE 5 TOGGLER KIT
(Model Number: FCAT1)
NOTE
: Floor-to-Wall Display Stand Models Only
(4x)
¼”-20 x 2½”
Hex Head Bolt
C
(4x)
¼”-20 Washer
D
(4x)
SNAPTOGGLE®
Anchor
B
Item
Weight Rating
Display Stand's Bottom Rackmount Storage
Display Stand's Top Small Device Storage
50 lbs. (23 kg) Maximum Total Rated Load Per Bay
25 lbs. (11 kg) Maximum Total Rated Load
Chief Fusion Fixed Display Mount Attached to the Forum Collaboration
Suite Display Stand (Free Standing or Floor-to-Wall)
150 lbs. (68 kg) Maximum Total Rated Load
NOTE
: The combined maximum total rated load of the mount installed on the stand must not exceed the total
rated load indicated. This includes the mounting of any additional camera, soundbar/audio, and AV accessories
on the stand or mount.
VERTICAL LEVER LOCK KIT (IF PURCHASED)
(Model Number: DSA-DW-LLKIT1)
10” Lever Lock
Plate
F
(2x)
10-32 x ⅜”
Thread Forming Screw
H
Lever Lock
Bracket
G
(2x)
Securing
Rivet
J
(20x)
Washer
K
